|
|
|
Who's Online
There currently are 6043 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
very good quality readable manual,printed off very well.
;
The manual was very accurate for the part that I was changing, I was able to order the correct part and had no issues with the replacement procedure. However, I was expecting to have more detailed repairs for the lower drive unit.
 ;
I needed the manual immediately and I got it immediately. I couldn't find this manual anywhere else on the net. The site was easy to traverse, and the price was very reasonable. I'll definitely be back for any future needs.
;
I received a good service manual, with good resolution. Improve the instructions for the purchase because they are not well understood.
For the rest, so good.
Thanks Angel.
;
Very good documentation for the Grundig 2077 model (as well as similar 800/900/1000 series radios). The first two pages are a summary of reception specifications and output capability. The third page is the tuner dial indicator and dial cord routing diagram. the final ~5 pages are the schematics for the various models (including 2077). The scan quality of the schematics are good, adn can be easily read if zoomed in. The documents are in German, not English as stated. It would have been nice to have the tuning sequence and settings, and some trouble shooting materials... or component and wiring map.
5
6
7
8
(Pause) Pauses at the position. (Eject) In the playback state or stop state, perform the disc eject. (Audio Play) Audio playbacks the arbitrary music. It is necessary for this command that Player is set up beforehand. Please execute (Play) first. (Reject) Stop by the command. Examples: When audio playbacks at track 8 Press buttons of [8], [AUDIO], ([FUNC] and [7]) in order.
A
� Test operation command
It can control servo operation finely. Be careful not to damage the player by mistake the usage of test command. (Test/Normal Mode Change) [C-MODE] Switch the Test mode/Normal mode by [FUNC] and [3] buttons. Can use only commands of 7TM from 0TM in the test mode. (Servo All Off) During servo ON, turn all servos OFF when pressing the [0] and [TIME] buttons in order. (Focus On) During CD STOP, turns the LD ON when pressing [1] and [TIME] buttons in order, and perform the autofocus. (Spindle Kick, Tracking ON/Off) During tracking servo OFF, perform the spindle kick and turn the automatic adjustment processing and tracking servo ON when pressing [2] and [TIME] buttons in order. Also during tracking servo ON, turn the tracking servo OFF when pressing [2] and [TIME] buttons in order. (Tracking OFF) During tracking servo ON, turn the tracking servo OFF when pressing [3] and [TIME] buttons in order. (Slide FWD) During tracking servo ON, turn the tracking servo OFF and move the slider in the FWD direction when pressing [4] and [TIME] buttons in order. (Slide REV) During tracking servo ON, turn the tracking servo OFF and move the slider in the REV direction when pressing [5] and [TIME] buttons in order. (Search TR No.2) During CD STOP, perform the following operations when pressing [6] and [TIME] buttons in order. LD ON � Autofocus � Spindle kick � Automatic adjustment processing � Second tune search � Tracking servo ON When performed Tracking OFF, there is the case that cannot rise up in this command. In that case please repeat once again. (Pickup UP/DOWN) During CD STOP, turn the LD ON and move the pickup up and down when pressing [7] and [TIME] buttons in order. Do not close the focus. * When rise by a step with the test mode, input a command by pressing buttons of [0], [TIME], [1], [TIME], [2] and [TIME] in order.
B
C
D
E
F
CDJ-800
5 6 7 8
57
|
|
|
> |
|
