PIONEER BD-V3511/KUCXJ
Service Manual

BD-V3501, BD-V3510 BD-V3511
FEATURE IDENTIFICATION
FRONT PANEL
BYPASS LIGHT Lights when the optional RF Bypass Adapter module is switched to bypass mode. When in bypass mode, the Adapter sends cable signals directly to the TV. CHANNEL AND VOLUME CONTROL/ CURSOR MOVEMENT KEYS These keys have different functions, depending on what is displayed on the TV screen. During normal TV viewing, the 5/� (up/down) arrows change the channel by stepping up or down one channel at a time. The 2/3 (left/right) arrows adjust the sound level up or down. When a menu is displayed, these same keys move the cursor up or down, left or right. CHANNEL NUMBER/TIME DISPLAY Shows channel number or current time. Also shows �rEC� when recording is taking place. CLEAR/MULTI-PURPOSE KEY When a menu is displayed, returns you to normal TV viewing. May also have special functions as described in the on-screen display. MESSAGE LIGHT Blinks when the BD-V3500 receives a message for you from the cable company, or an E-mail message from another person. POWER BUTTON Turns on the BD-V3500 and lights the Power-On indicator Light when pressed, or turns all off when pressed again. May also control the AC Power Outlet, depending on the BD-V3500�s settings. (Refer to the separate operating instruction manual.) POWER ON INDICATOR LIGHT Lights to show the BD-V3500 is turned on. REMOTE SENSOR WINDOW Receives signals from the remote control. IMPORTANT: Do not block this window. SELECT KEY Selects the desired action highlighted on the screen. SMARTCARD SLOT Accepts a special card provided by your cable company. This card is not always needed for BD-V3500 operation, unless required by the cable company.

REAR PANEL
AC POWER INLET Connects to an unswitched 120-volt AC outlet, using the detachable power cord (included). AC POWER OUTLET Provides AC power to the connected TV. CAUTION: Connect only the TV AC power cord to this outlet. This outlet allows 400 watts maximum power consumption. To prevent the risk of fire or damage to the Home Terminal, do not connect any kind of equipment of more than 400 watts power use, or any other equipment (toaster, hair dryer, etc.). BASEBAND AUDIO INPUT CONNECTORS Connects to the stereo (L and R) audio outputs of a DVD or LaserDisk player. When the BD-V3500 is off, this audio goes to the Baseband Audio Output Connectors. BASEBAND AUDIO OUTPUT CONNECTORS Connects to the stereo (L and R) audio inputs of a VCR, audio amplifier, or TV. Requires audio cables with male phono (RCA) plugs (not included). BASEBAND S-VIDEO OUTPUT CONNECTOR Connects to the S-video input of a TV or VCR. Requires special S-video cable (not included). If your TV or VCR doesn�t have a similar S-video jack, use the standard baseband video connection instead. BASEBAND VIDEO INPUT CONNECTOR Connects to the video output terminal on a DVD or LaserDisk player. During power standby status, the video is output to the output connector. BASEBAND VIDEO OUTPUT CONNECTOR Connects to the standard baseband video input of a VCR or TV. Requires video cables with male phono (RCA) plugs (not included). CABLE IN INPUT CONNECTOR Connects to the incoming cable service. Requires 75-ohm coaxial cable with male �F�-type connectors (not included). DIGITAL AUDIO OUTPUT CONNECTOR Connects to the digital audio input on your stereo amplifier, receiver or digital audio decoder. SERIAL PORT CONNECTOR Connects to the optional VCR Commander. TO TV OUTPUT CONNECTOR Connects to the TV�s VHF antenna input. Requires 75-ohm coaxial cable with male �F�-type connectors. USB CONNECTOR Connects to USB (Universal Serial Bus)-equipped options such as a wireless keyboard infrared receiver. IR CONTROL JACK Jack for connecting the IR CONTROL CABLE (option). To prevent malfunction, do not connect a cable other than the dedicated IR CONTROL CABLE. The IR CONTROL CABLE controls recording of programs on your VCR through the BD-V3500 program guide. Refer to the IR CONTROL CABLE instruction manual.

75