Excellent quality on these manuals. Same as having the original printed manual and incredibly useful when doing a custom install like me. Keep it up on the good work.
Thank you very much you are helping me a lot with my preferred hobby!!! this manual of an old TV is going to be very helpful!!!!
You are very honest competent great job very clear and well done!!!!
Matteo
An excellent service manual contains dismantling locations of components, electronic adjustments,worth the money.
Text excerpt from page 264 (click to view)
1
2
3
4
- Removing the Case (Fig.5)
A
1 2 3
Remove the two screws and then remove the Holder. Remove the screw.
3 1 3 2 1 3
3
3
Remove the five screws and then remove the Case.
B
Case
Holder
Fig.5
- Removing the Display Assy (Fig.6)
Motor Unit
Switch
1
Remove the screw.
Disconnect the connector and then remove the Motor Unit.
1
C
2 3
Remove the two screws and then remove the two Holders. Pull out the Display Assy in the arrow indicated direction.
Note) When reassembling, hold the switch down with tweezers or the like and put the Display Assy back to the Chassis. Otherwise, the switch may be damaged and not function properly.
2
D
2
Holder
3
Display Assy Holder
Fig.6
- Removing the Main Unit (Fig.7)
Bracket
2 1 3 3
Shaft Unit
2
1
E
Remove the screw and then remove the Bracket. Remove the four screws and then remove the Shaft Unit.
2 3
2
2
Remove the three screws.
3
Disconnect the connector and then remove the Main Unit.