Good copy and great customer service! There was some confusion with my order and it was resolved promptly!
Text excerpt from page 90 (click to view)
When front speaker HPF is selected in the network mode
Parameter What it does Selects cut-off frequencies in the following order: 50â63â80â100â125â160â 200 (Hz) Selects slopes in the following order: â18â â12â â6 (dB/oct.)
eration, refer to Storing the adjusted audio settings in memory on page 93.
Using the time alignment
The time alignment lets you adjust the distance between each speaker and the listening position.
To switch the filter of the front speaker between LPF and HPF, touch HIGH PASS or LOW PASS.
When front speaker LPF is selected in the network mode
Parameter What it does Selects cut-off frequencies in the following order: 1.25kâ1.6kâ2kâ2.5kâ3.15kâ 4kâ5kâ6.3kâ8kâ10kâ12.5k (Hz) Selects slopes in the following order: â12â â6â0 (pass) (dB/oct.)
Recalling time alignment settings
% Touch TIME ALIGNMENT on the sound setting menu to select the time alignment. Touch TIME ALIGNMENT repeatedly to switch between the following time alignment settings: INITIALâAUTOâCUSTOM1âCUSTOM2â CUSTOM3âLAST MEMORYâOFF
# You can select LAST MEMORY only when the adjusted time alignment setting is not memorized in this unit. # You cannot select AUTO when NETWORK has been selected. (Refer to Switching the DSP setting mode on page 105.) # When STANDARD has been selected, you cannot select AUTO if auto TA and EQ has not been carried out.
# You can mute the selected speaker unit by touching MUTE OFF. To cancel muting, touch MUTE ON. Notes ! Selecting cut-off frequencies sets cut-off frequencies of the subwooferâs L.P.F. (low-pass filter) and that of the SMALL speaker H.P.F. (high-pass filter). The cut-off frequency setting has no effect if the subwoofer is set to OFF and other speakers are set to LARGE or OFF. ! If trying to boost the bass output of the subwoofer doesnât do much or rather makes you feel that the bass gets more murky, this may indicate that the subwooferâs output and bass content you hear over other speakers cancel each other out. To remove this problem, try changing the phase setting for the subwoofer. ! You can store the adjusted setting in memory by using MEMORY. For details concerning op-
Adjusting the time alignment
You can adjust the distance between each speaker and the selected position. ! An adjusted time alignment can be memorized in CUSTOM1, CUSTOM2 or CUSTOM3. 1 Recall the time alignment setting you want to adjust. Refer to Recalling time alignment settings on this page.