|
Who's Online
There currently are 6043 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Excellent service from this company (including a total refund on an earlier purchase when through no fault of the company the manual was incomplete). I have purchased several manuals which I have been very satisfied with, as I am with this one. Highly recommended.
;
It was easy to order and received exactly what I needed. Only complaint would be the 24 hours you have to wait.
;
Manual was delivered in a timely manner and was all in English as advertised. The manuals I received when we moved into our flat were in German, Italian, and French. Having never used a steamer before, and not speaking/reading German very well, I needed an English Manual. this was a huge help.
;
Great Manual. This manual is available no where else. It was exactly what I was looking for. Only in German.
;
This GRUNDIG UV5A Owner Manual is not only an instruction manual but a total functional circuit description of the Multimeter and includes circuit diagram at the end pages. It is very helpful for repairing and calibrating the instrument. It is written in two languages English and German for international support. It was very easy to repair my unit with this document. Regards, Regis Pauly, Electrical Engineer.
CONNECTIONS
CONNECTING THE SPEAKER CORDS
1. Strip off the vinyl covering and twist the tip of the wire core.
10mm
CONNECTING THE INPUT/OUTPUT CORDS
Connect the white plug to the L (left) channel, and the red plug to the R (right) channel. Be sure to push the plugs securely. Left channel
Twist the wire core
White plug
L
2. Loosen the knob and insert the wire core into the terminal hole. 3. Tighten the knob to fix the wire core in place. 2 1
Right channel
R
Red plug
\
3
AC POWER CORD
NOTE:
Do not allow any of the cord conductors to protrude from the terminals or touch any other conductors. Malfunctioning or breakdowns may occur when conductors come into contact with each other.
Plug in the power cord first to the amplifier and then to the wall outlet after you have finished hooking up the rest of your equipment.
CAUTION!
� Do not use any other power cord than the one supplied with this unit. � The amplifier should be disconnected by removing the mains plug from the wall socket when not in regular use, e.g. when on vacation.
Please use the correct cord and plug for your region.
Speaker Impedance [A-209]
When speaker systems are connected to only SPEAKERS A or SPEAKERS B terminals, such speakers should have rated impedance in the range of 4�16 �. When speaker are connected to both A and B terminals, they should have a rated impedance in the range of 8 �32 �.
For regions with two pin flat-bladed plug and 200 volts or greater power supply European two pin plug with two pin flat-bladed converter plug (for 200 volts or greater power supply) For Taiwan exclusively Taiwanese two pin flat-bladed plug Make sure the voltage selector has been switched to the 110 V position before plugging in the AC power cord.
[A-109]
The speaker systems used should have a rated impedance in the range of 6 - 16 �.
5
English
|
|
|
> |
|